Innovation in timber engineering
Last update October 31, 2017 © Copyright Hundegger Canada Inc.
PBA-3 The largest and most sophisticated machine ever build by Hundegger April 22, 2016 The   Hundegger   PBA-3   is   a   new   machine   concept   and   new   technology   combined   with   the   experience   and   knowledge   of   40   PBA-1   &   PBA-2   machines   existing worldwide. A gantry style machine capable of being equipped with almost any tool you need, the possibilities are nearing endless.  This provides significant advantages:   Boost the functionality Increase the amount of processing Deep hole drilling with a 360 ° radius and depths up to 1250 mm Better surface quality due to higher tool speeds Integrated software package CAMBIUM I ncreased flexibility Modular facilities according to the modular principle Can be retro-fitted at any time Up to 2 units with automatic tool change Innovative clamping system Boost the dynamics   More powerful drives Faster positioning of all axis Retooling for off-peak times Flexibility component and editing PBA-3   is   the   portal   machining   center   for   cutting   and   editing   of   BSH   items   with   maximum   cross   sections   of   50   mm   x   5000   mm   and   a   length   of   53   m   long   or   2   x   22.5 m without restrictions to front-end edits or 2 x 26 m with restrictions designed. The   PBA-3,   with   the   correct   tooling,   is   capable   of   any   longitudinal,   oblique   and   mitre   cuts   as   well   as   milled   openings   and   contours   of   any   shape   or   size.   The components lying on the table are processed from the top or the sides. Editing the member base is possible as well (in the margin). The machine is equipped according to the respective company-specific needs. Aggregates and additional equipment can be retrofitted at any time. ………………………………………………………………………………………………………………………………………………………………………………………………. Hundegger’s New truss component saw - the Turbo-Drive machine November 6 - 13, 2015 From   Australia,   the   USA   &   Canada,   from   Spain,   Italy   and   England   -   Customers,   Hundegger   sales   representatives   and   service technicians traveled a long way to join a meeting in Germany. During   the   meeting,   Hundegger   introduced   the   new   Turbo-Drive   component   saw   and   the   CAMBIUM   user   interface   software   to   our valued clients and sales/service members.  The TURBO-Drive   machine   is   the   perfect   solution   for   customers   who   want   a   fast,   flexible   cutting   system.   Moreover,   it   can   even   perform drilling and milling and marking parts. The   heart   of   the   machine   is   the   sawing   unit   5   axes.   The   saw   5   axes   runs   different   type   of   cuts,   jibe,   square   cuts.   It   may   also   make   cuts at   any   angle   (0   °   to   360   °)   and   angle   (to   the   horizontal).   One   could   for   example   make   cuts   in   soul   or   make   the   rafter   spaces.   The   basic machine   (just   a   saw   5   axes)   is   even   more   flexible. The   machining   of   stacked   wood   for   wood   framing   and   trusses   also   remains   possible. There is no limit to length with a millimeter precision …more information ……………………………………………………………………………………………………………………………………………………………………………………………. Hundegger Production Count 2015 October 28, 2015 Since   Hundegger   was   started   in   1978,   we   have   well   over   4,690   machines   world   wide   operational .   With   machines   in Asia, Australia,   Europe   and   North America there   is   a   client   using   one   of   our   machines   as   we   speak.   If   you   think   about   it,   that’s   over   20   different   languages   and   countries   that   are   using   a   Hundegger   machine today! These are o ur machines so far > 2650 Joinery machines > 1100 Fully automated 4-sided planer > 800 Truss components saws > 100 SPM Panel cutting systems > 40 PBA Panel cutting systems ………………………………………………………………………………………………………………………………………………………………………………………………. BCMC Show 2015 WISCONSIN CENTER | MILWAUKEE, WI USA OCTOBER 23, 2015 We would be pleased to welcome you at our Hundegger booth # 221 The   Building   Component   Manufacturers   Conference   (BCMC)   has   become   a   trusted   venue   for   structural   building   component manufacturers   to   learn   about   the   latest   industry   ideas,   products   and   trends   throughout   their   entire   supply   chain.   This   annual trade   show   includes   a   dynamic   exhibit   floor   with   active   machinery   demonstrations,   valuable   educational   opportunities   and the chance to develop and enjoy the camaraderie of an industry that spans generations. Since   its   inception   in   1980,   the   objective   of   BCMC   has   been   to   educate,   inform   and   encourage   the   growth   of   structural building   component   manufacturing.   Over   the   course   of   its   history,   the   show   has   welcomed   exhibitors   from   all   over   the   world to   showcase   the   cutting   edge   technology,   state-of-the-art   processes   and   innovative   products   and   services   that   have   helped build a multi-billion dollar industry and shape the future of framing. ………………………………………………………………………………………………………………………………………………………………………………………………. UNBC - University of Northern British Columbia October 01, 2015 UNBC   researchers   are   taking   engineered   timber   to   new   levels   of   construction   performance   through   a   brand   new   and   fully   computerized   Hundegger   SC3   Cutting Automate. The new machine was installed over the long weekend October-9th - October-12 by Hundegger Canada Inc. technicians. The   new   SC3   machine   is   the   most   versatile   CNC   automated   component   saw   available.     The   machine   is   capable   of   processing   well   over   3500 truss   parts   or   18,200   feet   of   I-Joists   in   a   single   shift,   but   gives   a   company   the   freedom   to   go   way   beyond   the   functionality   and   capabilities   of   its competitors component saws.  Over 30 years of experience, customer feedback and quality have been built into the SC3. Fully   equipped   the   machine   can   process:   Truss,   I-Joist,   stair   stringer   and   stick   framing   components   and   even   allows   a   customer   to   process entry-level  timber framing parts to broaden their income potential.
News & Events
Innovation in timber engineering
Last update October 31, 2017     © Copyright Hundegger Canada Inc.
Mobile Version of Hundegger Canada Inc.
PBA-3 The largest and most sophisticated machine ever build by Hundegger April 22, 2016 The   Hundegger   PBA-3   is   a   new   machine   concept   and new    technology    combined    with    the    experience    and knowledge    of    40    PBA-1    &    PBA-2    machines    existing worldwide.    A    gantry    style    machine    capable    of    being equipped   with   almost   any   tool   you   need,   the   possibilities are nearing endless.  This provides significant advantages:   Boost the functionality Increase the amount of processing Deep   hole   drilling   with   a   360   °   radius   and   depths up to 1250 mm Better surface quality due to higher tool speeds Integrated software package CAMBIUM I ncreased flexibility Modular     facilities     according     to     the     modular principle Can be retro-fitted at any time Up to 2 units with automatic tool change Innovative clamping system Boost the dynamics   More powerful drives Faster positioning of all axis Retooling for off-peak times Flexibility component and editing PBA-3   is   the   portal   machining   center   for   cutting   and editing   of   BSH   items   with   maximum   cross   sections   of   50 mm   x   5000   mm   and   a   length   of   53   m   long   or   2   x   22.5   m without   restrictions   to   front-end   edits   or   2   x   26   m   with restrictions designed. The   PBA-3,   with   the   correct   tooling,   is   capable   of   any longitudinal,   oblique   and   mitre   cuts   as   well   as   milled openings    and    contours    of    any    shape    or    size.    The components   lying   on   the   table   are   processed   from   the top   or   the   sides.   Editing   the   member   base   is   possible   as well (in the margin). The   machine   is   equipped   according   to   the   respective company-specific    needs.    Aggregates    and    additional equipment can be retrofitted at any time. ……………………………………………………………… Turbo-Drive cutting automate November 6 - 13, 2015 From   Australia,   the   USA   &   Canada,   from   Spain,   Italy and      England      -      Customers,      Hundegger      sales representatives   and   service   technicians   traveled   a   long way to join a meeting in Germany. During    the    meeting,    Hundegger    introduced    the    new Turbo-Drive   component   saw   and   the   CAMBIUM   user interface      software      to      our      valued      clients      and sales/service members. The   TURBO-Drive   machine   is   the   perfect   solution   for customers    who    want    a    fast,    flexible    cutting    system. Moreover,   it   can   even   perform   drilling   and   milling   and marking parts. The   heart   of   the   machine   is   the   sawing   unit   5   axes.   The saw   5   axes   runs   different   type   of   cuts,   jibe,   square   cuts. It   may   also   make   cuts   at   any   angle   (0   °   to   360   °)   and angle   (to   the   horizontal).   One   could   for   example   make cuts    in    soul    or    make    the    rafter    spaces.    The    basic machine   (just   a   saw   5   axes)   is   even   more   flexible.   The machining    of    stacked    wood    for    wood    framing    and trusses   also   remains   possible. There   is   no   limit   to   length with a millimeter precision …more information ……………………………………………………………… Hundegger Production Count 2015 October 28, 2015 Since   Hundegger   was   started   in   1978,   we   have   well over   4,690   machines   world   wide   operational .   With machines   in   Asia,   Australia,   Europe   and   North   America there   is   a   client   using   one   of   our   machines   as   we   speak. If   you   think   about   it,   that’s   over   20   different   languages and    countries    that    are    using    a    Hundegger    machine today! so far showing > 2650 Joinery machines > 1100 Fully automated 4-sided planer > 800 Truss components saws > 100 SPM Panel cutting systems > 40 PBA Panel cutting systems Hundegger machines are worldwide in operation. ……………………………………………………………… BCMC Show 2015 WISCONSIN CENTER | MILWAUKEE, WI USA OCTOBER 20-23, 2015 We    would    be    pleased    to    welcome    you    at    our Hundegger booth # 221 The    Building    Component    Manufacturers    Conference (BCMC)    has    become    a    trusted    venue    for    structural building   component   manufacturers   to   learn   about   the latest    industry    ideas,    products    and    trends    throughout their         entire supply     chain. This        annual trade         show includes          a d   y   n   a   m   i   c     exhibit        floor with         active   demonstrations,   valuable   educational   opportunities   and the   chance   to   develop   and   enjoy   the   camaraderie   of   an industry that spans generations. Since   its   inception   in   1980,   the   objective   of   BCMC   has been   to   educate,   inform   and   encourage   the   growth   of structural   building   component   manufacturing.   Over   the course   of   its   history,   the   show   has   welcomed   exhibitors from   all   over   the   world   to   showcase   the   cutting   edge technology,    state-of-the-art    processes    and    innovative products   and   services   that   have   helped   build   a   multi- billion dollar industry and shape the future of framing. --------------------------------------------------------------------------- UNBC - University of Northern British Columbia October - 2015 UNBC   researchers   are   taking   engineered   timber   to   new levels   of   construction   performance   through   a   brand   new and     fully     computerized     Hundegger     SC3     Cutting Automate. The   new   machine   was   installed over   the   long   weekend   October- 9th   -   October-12   by   Hundegger Canada Inc. technicians. The   new   SC3   machine   is   the most   versatile   CNC   automated component   saw   available.      The machine        is        capable        of processing   well   over   3500   truss parts   or   18,200   feet   of   I-Joists   in   a   single   shift,   but   gives a     company     the     freedom     to     go     way     beyond     the functionality      and      capabilities      of      its      competitors component    saws.        Over    30    years    of    experience, customer   feedback   and   quality   have   been   built   into   the SC3. Fully   equipped   the   machine   can   process:   Truss,   I-Joist, stair   stringer   and   stick   framing   components   and   even allows   a   customer   to   process   entry-level    timber   framing parts to broaden their income potential.